Pandomo W3 creates the timeless concrete grey nuance.
Pandomo Wall is a decorative finishing render for creating and designing the surfaces of walls and ceilings in internal areas.
Consumption: 1 kg/m2 on even surfaces. Please note! Consumption is based on application in one layer on an even, non-absorbent surface. For use in multiple layers or on uneven surfaces the consumption will vary.
Potable water is put into a clean mixing container and whilst stirring vigorously powder is mixed in to give a supple, lump-free mortar.
Approximately 2.5 l of water are needed to mix 5 kg of Pandomo W3 powder. After a maturing period of 1– 3 minutes and repeated stirring, the mortar can be applied at temperatures between 18–20°C within approx. 30 minutes. Small holes and minor, stable cracks can be filled using Pandomo.
When preparing two-dimensional areas with finishing render, the first preparation layer should be tinted to adapt to the required colour tone, up to a nominal layer thickness of 2 mm. When trowelling the surface to produce decorative effects the minimum thickness should be 1 mm.